Wood carving

What Is a Wood Carving Sculpture?

Wood carving (also spelled woodcarving) is a form of woodworking by means of a cutting tool (knife) in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet, in the result a wooden figure or figurine, or in the sculptural ornamentation of a wooden object. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Wood carving (also spelled woodcarving) is a form of woodworking by means of a cutting tool (knife) in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet; in the result a wooden figure or figurine, or in the sculptural ornamentation of a wooden object. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery. It is best to run the delicate parts of a design with the grain, not across it. Often however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or orientation of these along the grain would require carving detail on end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery.

Wood sculpture made by Alexander Grabovetskiy

The making of sculpture in wood has been very widely practiced but does not survive undamaged so well as the other main materials such as stone and bronze, as it is vulnerable to decay, insect damage, and fire. It is therefore a more hidden element in the art history of many cultures. Outdoor wood sculptures do not last long in most parts of the world, so how the totem pole tradition developed is still unknown. In particular, many of the most important sculptures of China and Japan are in wood, as are the great majority of African sculpture. Wood is light and takes very fine detail, so it is very suitable for masks and other sculptures to be worn or carried. It is also much easier to work than stone, and because of its fibrous strength, it can be carved more thinly and accurately. The term can also be used for the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Some of the best surviving examples of early European wood carving are from the Middle Ages in Germany, Russia, Italy, and France, where the typical themes of that period were Christian iconography. Oak was the popular medium, and many examples from the 16th and 17th centuries survive intact in England. In particular, many of the most important sculptures of China and Japan are in wood, as are the great majority of African sculpture and that of Oceania and other regions. The oldest sculpture carved out of wood is the Shigir Idol, which is about 12,000 years old.

A 3-meter-long wooden crocodile, made for a playground in Ystad.

The scope of the carver is limited by the nature of the wood being carved in that wood is not equally strong in all directions; it is an anisotropic material. The direction in which wood is strongest is called "grain" (grain may be straight, interlocked, wavy, fiddleback, etc.). It is best to run the delicate parts of a design with the grain, not across it. Often, however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or the orientation of these along the grain would require carving detail on the end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). The term can also be used for the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The two hardwoods that are most frequently used for carving in North America are probably tupelo and basswood (also known as tilia or lime); both are reasonably easy to work with. Other excellent woods include mahogany, teak, American walnut, chestnut, butternut, and oak. Italian walnut, sycamore maple, apple, pear, box, or plum are typically used for fine craftsmanship, which is somewhat soft and reasonably priced, is frequently used to carve decorations that are to be painted and of a less delicate character.

Mambila figure, Nigeria

When starting a new carving, a wood carver chooses a piece of wood that is roughly the size and shape of the figure they want to make. If the carving is going to be enormous, multiple pieces of wood may be bonded together to get the necessary size. It matters what kind of wood it is. Hardwoods have more gloss and endurance but are more challenging to form. Although they may be carved more easily, softer woods are more vulnerable to damage. It is best to run the delicate parts of a design with the grain, not across it. Often, however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or the orientation of these along the grain would require carving detail on the end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. Although any wood can be carved, each one has unique properties and traits. The term can also be used for the finished article, from single sculptures to hand-worked moldings forming part of a tracery. It is best to run the delicate parts of a design with the grain, not across it. Often, however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or the orientation of these along the grain would require carving detail on the end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery.

A wooden Bodhisattva from the Song dynasty (960–1279)

A wooden Bodhisattva from the Song dynasty (960–1279

Wood carving (also spelled woodcarving) is a form of woodworking by means of a cutting tool (knife) in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet, in the result a wooden figure or figurine, or in the sculptural ornamentation of a wooden object. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Wood carving (also spelled woodcarving) is a form of woodworking by means of a cutting tool (knife) in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet; in the result a wooden figure or figurine, or in the sculptural ornamentation of a wooden object. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery. It is best to run the delicate parts of a design with the grain, not across it. Often however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or orientation of these along the grain would require carving detail on end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). It is best to run the delicate parts of a design with the grain, not across it. Often however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or orientation of these along the grain would require carving detail on end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery. The term can also be used for the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The two hardwoods that are most frequently used for carving in North America are probably tupelo and basswood (also known as tilia or lime); both are reasonably easy to work with. Other excellent woods include mahogany, teak, American walnut, chestnut, butternut, and oak.

Wooden portrait of Minamoto no Yoritomo, 13–14th century
Wooden portrait of Minamoto no Yoritomo, 13–14th century

The term can also be used for the finished article, from single sculptures to hand-worked moldings forming part of a tracery. Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The two hardwoods that are most frequently used for carving in North America are probably tupelo and basswood (also known as tilia or lime); both are reasonably easy to work with. Other excellent woods include mahogany, teak, American walnut, chestnut, butternut, and oak. It is best to run the delicate parts of a design with the grain, not across it. Often however, a "line of best fit" is used instead, as a design may have multiple weak points in different directions, or orientation of these along the grain would require carving detail on end grain. In order to arrange various parts of a carving in the most sensible manner for both the carving process and longevity, carving blanks are occasionally put together from numerous smaller boards, as with carousel horses. Less frequently, this same idea is applied to solid wood, where a branch from a larger log is carved into a beak or the fork of two branches is used for its divergent grain (this method was used for some Native American adz handles and traditional Welsh shepherd's crooks). Failure to recognize these fundamental principles can be consistently observed in damaged work, where similar details that are more in harmony with the growth of the wood and not too deeply undercut remain intact while tendrils, bird beak tips, etc., arranged across the grain, have been broken away. The term can also be used of the finished article, from single sculptures to hand-worked moldings forming part of a tracery.

Join our classes to enhance & improve your memory skills and let your child unlock the power to retain information from every moment of his/her life!